replacing kenmore elite water filter
| |

How To Change A Kenmore Elite Water Filter

Are you ready to dive into the world of water filter maintenance? Changing a Kenmore Elite water filter is as easy as a breeze passing through your hair.

In just a few simple steps, you'll have clean and refreshing water flowing through your home once again. Whether you're a DIY enthusiast or a beginner in the world of home maintenance, this guide is here to help you feel like a part of a community that values cleanliness and well-being.

So, let's get started on this journey towards a healthier and happier home. Get your tools ready and let's embark on this adventure together!

Key Takeaways

  • Gather the necessary supplies such as the correct filter number, pliers or filter wrench, a clean cloth or towel, and a bucket or container to catch spilled water.
  • Locate and access the water filter by opening the refrigerator door and finding the filter compartment. Release the compartment door and remove the water filter cartridge by twisting it counterclockwise.
  • Remove the old water filter by opening the compartment door and carefully pulling it out. Dispose of the old filter properly and clean the water dispenser before installing the new filter.
  • Install the new water filter by ensuring the refrigerator is powered off and the water supply is disconnected. Open the water filter compartment, remove the protective cover from the o-rings, align and push the new filter upwards until it locks into place. Troubleshoot any installation issues if necessary.

Gather Necessary Supplies

To change a Kenmore Elite water filter, you'll need to gather the necessary supplies. Here are the steps to gather the supplies and get started:

  1. First, make sure you have a replacement water filter specific to your Kenmore Elite model. Check your owner's manual or the manufacturer's website for the correct filter number.
  2. Next, gather a pair of pliers or a filter wrench. These tools will help you loosen and remove the old water filter.
  3. You'll also need a clean cloth or towel to wipe away any water or debris that may be present around the filter area.
  4. It's a good idea to have a bucket or container nearby to catch any water that may spill out when removing the old filter.
  5. Lastly, keep the troubleshooting common issues with Kenmore Elite water filters in mind. If you encounter any difficulties during the filter replacement process, refer to the troubleshooting section in your owner's manual or contact Kenmore customer support for assistance.

Locate and Access the Water Filter

To locate and access the water filter, first ensure you have gathered the necessary supplies mentioned in the previous subtopic. Once you have everything you need, follow these steps to find and access the water filter in your Kenmore Elite refrigerator.

  1. Open the refrigerator door and locate the filter compartment. It's usually located in the upper right-hand corner of the refrigerator.
  2. Look for a small tab or button on the filter compartment. Press or push it to release the compartment door.
  3. Once the door is open, you'll see the water filter cartridge. Carefully remove it by twisting it counterclockwise.
  4. Take a moment to inspect the water filter for any signs of damage or dirt. If necessary, clean the filter using warm water and a soft brush, or replace it if it's worn out or past its recommended lifespan.
  5. Before installing the new water filter, check the filter compartment for any debris or buildup. Wipe it clean with a damp cloth if needed.
  6. Insert the new water filter into the compartment and twist it clockwise until it's securely in place.
  7. Close the filter compartment door and make sure it clicks or locks into position.

If you encounter any issues during this process, such as difficulty removing the old filter or problems with the compartment door, consult the refrigerator's user manual for troubleshooting common issues or contact Kenmore customer support for assistance.

Remove the Old Water Filter

To remove the old water filter in your Kenmore Elite refrigerator, follow these simple steps.

  1. Start by locating the water filter compartment. It's usually located inside the refrigerator, either in the upper right corner or the lower grille area.
  2. Open the compartment door by pushing the release button, if applicable. Some models may have a twist-off mechanism instead.
  3. Once the door is open, carefully pull out the old water filter. Be cautious as it may still contain water.
  4. Discard the old filter in an appropriate manner. It's recommended to wrap it in a plastic bag to prevent any potential leaks or spills.
  5. Before installing the new water filter, it's advisable to clean the water dispenser. This can be done by following the manufacturer's instructions or using a mixture of warm water and mild detergent.
  6. If you have been experiencing any issues with your water filter, such as a decrease in water flow or unusual taste, you may want to troubleshoot the problem before installing the new filter. Check the refrigerator's manual or contact the manufacturer for troubleshooting guidance.
  7. Once the cleaning and troubleshooting steps are complete, you can proceed to install the new water filter following the instructions provided in the filter packaging.

Install the New Water Filter

To properly install the new water filter in your Kenmore Elite refrigerator, follow these step-by-step instructions:

  1. Always make sure that the refrigerator is powered off and the water supply is disconnected.
  2. Locate the water filter compartment. In most Kenmore Elite refrigerator models, it's located in the upper right corner of the refrigerator compartment.
  3. Open the compartment by pushing the release button and pulling the filter cap downwards.
  4. Take the new water filter out of its packaging and remove the protective cover from the o-rings. Make sure the o-rings are clean and not damaged.
  5. Align the new water filter with the filter housing and push it upwards until it locks into place. You should hear a gentle click when it's properly installed.

If you encounter any issues during the installation process, here are some troubleshooting tips:

  • If the water filter doesn't lock into place, double-check that it's properly aligned and try again.
  • If you're having difficulty removing the old water filter, make sure you're applying enough downward pressure while pushing the release button.

Following these installing instructions and troubleshooting common issues should ensure a smooth and successful installation of the new water filter in your Kenmore Elite refrigerator.

Reset the Filter Status Indicator (If Applicable)

After installing the new water filter, you can now proceed to reset the filter status indicator, if applicable. Resetting the filter status indicator is an important step to ensure accurate monitoring of your filter's performance and timely replacement. Here's a step-by-step guide to help you reset the filter timer and troubleshoot common filter issues.

  1. Locate the control panel on your Kenmore Elite refrigerator. The filter status indicator is usually found on the panel.
  2. Look for the 'Filter Reset' or 'Reset' button. Press and hold this button for approximately 3 seconds until the indicator light changes or turns off.
  3. If your refrigerator doesn't have a dedicated reset button, consult the user manual for specific instructions on how to reset the filter status indicator. The manual will provide detailed information on the process.
  4. After resetting the filter status indicator, monitor its performance. If the indicator light doesn't change or continues to show an error, try the following troubleshooting steps:
  1. Ensure that the new water filter is properly installed. Double-check the installation instructions to make sure it's correctly aligned and securely in place.
  2. Check if there are any obstructions or blockages in the filter compartment. Remove the filter and inspect for any debris that may be hindering its operation.
  3. If the indicator light still doesn't reset or shows an error, contact Kenmore customer support for further assistance.

Follow these steps to reset the filter status indicator and troubleshoot any common issues you may encounter. By properly maintaining and monitoring your water filter, you can ensure clean and fresh drinking water for you and your family.

Frequently Asked Questions

How Often Should the Kenmore Elite Water Filter Be Changed?

To keep your Kenmore Elite water filter working effectively, change it regularly. The lifespan of the filter depends on factors like water quality, but generally, it should be replaced every 6 months. Signs of a clogged filter include decreased water flow and a change in taste.

Can I Use a Generic Water Filter Instead of the Kenmore Brand?

Yes, you can use a generic water filter instead of the Kenmore brand. However, it's important to note that the Kenmore brand offers benefits such as quality and compatibility.

Is It Necessary to Shut off the Water Supply Before Changing the Water Filter?

Before changing the water filter, it is necessary to shut off the water supply. This precaution ensures a smooth and clean filter replacement process. Regular water filter maintenance is essential for maintaining the quality of your drinking water.

How Can I Tell if the Water Filter Needs to Be Replaced?

To determine if your water filter needs replacing, look out for signs like slower water flow, unusual taste or odor, or if it's been six months since the last change. Don't worry, we'll guide you through the steps to replace it.

Are There Any Special Instructions for Disposing of the Old Water Filter?

When disposing of the old water filter, it is important to follow the proper instructions to minimize environmental impact. Check the manufacturer's guidelines for specific instructions on how to safely dispose of your Kenmore Elite water filter.


In just a few simple steps, you can easily change the water filter in your Kenmore Elite.

Gather your supplies, locate and access the filter, remove the old one, install the new filter, and reset the filter status indicator if needed.

With this straightforward process, you'll have clean and fresh water in no time, giving your Kenmore Elite the care it deserves.

So go ahead, take control of your water quality and enjoy the convenience of a new filter.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *